Micronics PCI/ISA System Board D6-IN Especificaciones descargar pdf (Pagina 20)

3-5

Installing System Memory and Add-On Peripherals

Installing the SIMMs

To install the SIMMs, locate the memory banks on the system board and

perform the following steps:

1. Hold the SIMM so the notched edge is aligned with the notch on

the SIMM socket (Figure 3-1).

2. Insert the SIMM at a 45 degree angle.

3. Gently push the SIMM into an upright position until it locks into

place (past the release tabs).

Figure 3-1 Installing a 72-Pin SIMM

Removing SIMMs

Perform the following steps to remove SIMMs, if necessary:

1. With both thumbs (or a finger from each hand), press the release

tabs

away from the socket.

2. With the SIMM free from the release tabs, lift the module up and

place in an anti-static bag or package.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 65 66

Sin comentarios

Micronics PCI/ISA System Board D6-IN Especificaciones Pagina 20