Micronics PCI/ISA System Board D6-IN Manual de usuario descargar pdf (Pagina 19)

3-5

Installing System Memory and Add-On Peripherals

Installing the SIMMs

To install the SIMMs, locate the memory banks on the system board and

perform the following steps:

1. Hold the SIMM so the notched edge is aligned with the notch on the

SIMM socket (Figure 3-1).

2. Insert the SIMM at a 45 degree angle.

3. Gently push the SIMM into an upright position until it locks into place

(past the release tabs).

Figure 3-1 Installing a 72-Pin SIMM

Removing SIMMs

Perform the following steps to remove SIMMs, if necessary:

1. With both thumbs (or a finger from each hand), press the release tabs

away from the socket.

2. With the SIMM free from the release tabs, lift the module up and place in

an anti-static bag or package.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 50 51

Sin comentarios

Micronics PCI/ISA System Board D6-IN Manual de usuario Pagina 19